18th Century french chair - kit from Alison Davies

£39
Available
Not available
Only a few left (10 items)
Not available
Product reminder

Enter your e-mail address below and we will notify you when the product is available!

Product Description:
The chair measures 90mm high x 6.5cm wide x 5cm deep. The actual seat measures 6cm wide at the front and 4.5cm wide at the rear and is 4.5cm deep.


This is a KIT - some of the images shown show the chair painted and assembled. This is a 12th scale copy of a real 18th Century French chair! The original was found in an incredibly expensive Antique shop in Paris where the owners gave me permission to photograph it and reproduce it in 12th scale. I had to adapt the design slightly for ease of production but all the decoration and detail is as authentic as possible.

Chairs & Sofas

The chair and sofa kits consist of the metal frame and plastic seat and back inserts. The kits are fresh from the mould which means that you will need to remove any casting spurs. I use a small file and sandpaper to do this.To assemble the chairs you will require super glue/cyano glue - I like to use a gel glue by Deluxe or Haffix by Haffix but any superglue will be fine - alternatively you could use epoxy glue.The kits are easy to assemble and if you have never assembled a kit before the challenge should be fine. I do not supply foam pads but ether a 5mm or 10mm thickness of foam works well. You may need to sand the corners of the chair seat pad to allow the seat pad to easily fit into the frame. It will fit without sanding but when the pad is covered in fabric it might be a little tight if using thick fabric..To paint the chair you can use any paints - acrylic, oils, emulsion, spray paints. Metal primer/undercoating is required.

Recommended accessories for this item
Categories
    Svenska English 

    Produced by: Wikinggruppen

    The product has been added to your cart

    To CheckoutContinue shopping